Planet Technology SOHO Internet Telephony PBX System IPX-600 - Manual (Page 23)

23
Busy Disable pressing these specific digits on the IP Phone, then press a ‘#’ digit.
(This procedure must be done when the IP Phone is off-hooked and
heard the dial tone). You can also disable this function through the
menu configuration of the IP Phone device. The default value for this
function is *4.
Call Forward on
No Answer Enable
Enable the call forward on no answer function of each IP Phone by
pressing the specific digits on the IP Phone followed by the
extension number to be forwarded, and then press a ‘#’ digit. (This
procedure must be done when the IP Phone is off-hooked and heard
the dial tone). You can also enable this function through the menu
configuration of the IP Phone device. The default value for this
function is *5.
Call Forward on
No Answer
Disable
Disable the call forward on no answer function of each IP Phone by
pressing these specific digits on the IP Phone, then press a ‘#’ digit.
(This procedure must be done when the IP Phone is off-hooked and
heard the dial tone). You can also disable this function through the
menu configuration of the IP Phone device. The default value for this
function is *6.
Call Pickup
Number
This is the digits for any IP Phone to press (after off-hooked) to
pickup a call of the other ringing extension on the same pickup
group. Remember to press a ‘#’ digit after the specific digits. The
default value for this function is *7.
Table 12. Call forward setting description
¾ Call Park
Parameter description:
Field Description
Call Park Number
This is the digit(s) for any extension IP Phone to press during a call
conversation to park this call, a following ‘#’ digit must be pressed,
then, a retrieve number (9900~9910) will be heard on the phone, .
After you walk to another IP Phone, you can dial the retrieve number
you just heard in the parked IP Phone to retrieve back the previous
call conversation. The default value for this Call Park Number is 9.
Call Retrieve
Number
This is the retrieve number range the user will heard from the phone
when parking a call.
Parking Time
This is the maximum allowed parking time for the parked call. The
default value for this function is 30 seconds.
Table 13. Call Park setting description