Philips SoundBar HTS6120 - Manual (Page 22)

22
6
Select the audio input of this Home
Theatre System that is used to connect to
other HDMI device, then press .
For example, if the TV audio is •
connected to the AUX1 jack on the
Home Theatre System, select [Aux1
Input] and map with the TV (brand
name) at the right panel.
7
Select the correct connected device, then
press OK.
Repeat steps 5–7 to map other
»
connected devices.
8
Press SETUP to exit the menu.
Map the devices to the audio inputs
Note
Before you start, ensure that the audio output •
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theatre System.
1
Press DISC.
2
Press SETUP.
» [General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup], then press
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On],
then press OK to start scanning devices.
Once complete, the audio input
»
mapping menu is displayed.
EasyLink
One Touch Standby
System Audio Control
One Touch Play
Audio Input Mapping
Display Dim
Screen Saver
OSD Language
Disc Lock
General Setup
Sleep Timer
Low Power Standby
EasyLink Setup
DivX(R) VOD Code
Aux1 Input
Coaxial Input
Optical Input
Audio Input Mapping
SCART Input [TV]
other(non-HDMI)
[DVD 3400]
Aux2 Input
Aux3 Input
EN