Philips SoundBar HTS6120 - Manual (Page 12)

12
Option 3: Connect to the component
video jack
1
Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theatre System and the
COMPONENT VIDEO input jacks on the
TV.
If a progressive scan TV is used, you •
can turn on the progressive scan
mode. (see ‘Get started’ > ‘Turn on
Progressive Scan’).
Note
The component video input jack on the TV •
might be labelled as Y Pb Pr, Y Cb Cr or YUV.
This type of connection provides good picture
•
quality.
Y Pb Pr
COMPONENT
VIDEO OUT
Option 2: Connect to the SCART jack
1
Connect a scart cable to the SCART jack
on the Home Theatre System and the
SCART input jack on the TV.
Note
Scart connection allows TV’s audio output •
through the speakers. Press AUDIO SOURCE
repeatedly until ‘SCART INPUT’ is displayed
on the display panel.
This type of connection provides good picture
•
quality.
SCART
SCART
EN