Philips SoundBar HTS6120 - Manual (Page 19)

19
5
Press to continue.
» [Room Acoustics] screen is displayed.
6
Select the condition of the room, then
press .
» [Room Placement] screen is displayed.
7
Select the Home Theatre System’s
placement in the room, then press .
» [Height] screen is displayed.
Please select the type of walls that surround
your room:
Select
Room Acoustics
Back Change
Soft (Curtains, open space)
Hard (Concrete, wood)
Select the Sound Bar system placement position
in your room:
Select
Room Placement
Back Change
Near the right wall
Corner of room
Near the left wall
Middle of room
Select the height at which your SoundBar system
is placed:
Select
Height
Back Change
High (> 1.2m / 3.9ft)
Low (< 0.8m / 2.6ft)
Default (0.8-1.2m / 2.6-3.9ft)
Tip
The video-in channel is between the lowest •
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc. See the
TV user manual on how to select the correct
input on the TV.
Start Ambisound setup
When you turn on the Home Theatre System for
the fi rst time, follow the instructions on the TV to
complete the Ambisound setup in order to obtain
the best possible surround sound effect.
Note
Before you start, ensure that you have made •
all the required connections.
Complete the Ambisound setup before you
•
insert a disc to play.
1
Press DISC to switch to disc mode.
2
Turn on the TV and switch it to the
correct video-in channel.
» [OSD Language] screen is displayed.
3
Select a language for on-screen menu
display, then press .
A welcome message is displayed.
»
4
Press to continue.
A message on product orientation is
»
displayed.
Please choose your language:
Continue
OSD Language
Stop: Exit
Dansk
English
Nederlands
Deutsch
Français
Suomi
English
EN