Increasing the number of end-user systems, Cables & connectors, Pin # function – Paradyne 6310 MVLT User Manual
Page 10
98-15304a
6-Pin
RJ11 Plugs
Pin #1
Pin #6
10
To enable the sharing of resources and review security considerations, see Microsoft’s
Web site at www.microsoft.com.
In this example of HomeLink, the PC in the family room could use the office printer.
98-15952a-01
RJ11
Wall
Jack
MVL Modem
Office
PHONE
POWER
ETHERNET
LINE
Hub
FAX
Ethernet
Cable
Printer
RJ11
Wall
Jack
PHONE
POWER
ETHERNET
LINE
MVL Modem
Family Room
Increasing the Number of End-User Systems
A single end-user system is attached to the Hotwire 6310 MVL Modem by using an
Ethernet crossover cable. To increase the number of end-user systems, connect all the
PCs to an Ethernet hub using a straight-through cable.
On one line, the MVL system provides the capability to use up to four 6310 MVL
modems and 32 end-user systems in any combination.
Cables & Connectors
This section is reference information.
Standard twisted-pair CAT3 or better cables are recommended.
H
The LINE and PHONE interface connectors use 6-pin, non-keyed modular plugs.
RJ11 6-Pin Connector
Pin #
Function
1 & 2
Not used
3
MVL Ring
4
MVL Tip
5 & 6
Not used