Promise Technology FastTrak S150 - Manual (Page 39)

Chapter 4: Installing Software Drivers
35
Existing Windows XP Installation
After installing the FastTrak S150 TX4 card and rebooting your system,
Windows XP setup will show a “Found New Hardware” dialog box. Under
Windows XP, “Mass Storage Controller” will be displayed.
1. Insert the FastTrak TX4 driver diskette into the A:\ drive.
2. Choose Install the software automatically and press the Enter key.
3. Choose WinXP Promise FastTrak TX4000/S150 TX Series Controller from
the list that appears on screen, and then press the Enter key.
4. If using a driver that has not been digitally signed by Microsoft, you will be
asked if you want to continue the installation. Click Continue anyway.
5. When the New Hardware Wizard has finished installing the FastTrak TX4
software, click Finish.
Confirming Windows XP Driver Installation
1. Right-click on the My Computer icon and select Manage from the popup
menu.
2. From the left panel, select Device Manager.
3. Click the “+” in front of SCSI controllers. “WinXP Promise FastTrak
TX4000/S150 TX Series Controller” should appear.