Philips DCR 2020 - Manual (Page 9)

Front panel
1 Smart Card slot:
. . . . . . . . . . . . . . . . . . . . . . .
see chapter Inserting your Smart Card
2 U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
channel +
3 I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
channel -
4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
mute/demute
5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ON/”low power”
The front panel button hides the remote control receiver window and includes
two LEDs indicating the receiver status. One of the LEDs blinks at remote control
command reception.
If the red LED is blinking continuously, it indicates that an upgrade of your terminal
software is taking place. Do not interrupt this operation.Wait for the green LED to
light up, indicating successful upgrade, and then continue as normal.
Receiver operating mode LED1 LED2
Low Power red off
Standby off red
Running in TV mode off green
Running in Radio mode off orange
TV recording in progress red green
Radio recording in progress red orange
Recording ongoing during standby red red
Download in progress blinking red off
43
EN
Product description
Q T
W R E
DCR 2020_indice1 1/09/05 15:26 Page 43