Philips DCR 2020 - Manual (Page 26)

60
EN
Changing PIN code:
- Scroll to Changing PIN code, and then press OK.
- Enter your current PIN code and press OK.
- Enter your new PIN code and press OK.
- Enter your new PIN code again and press OK.
Once you have changed your Pin Code, keep it secret
to prevent others from using it. If you forget or lose
your Pin Code, call your customer service adviser.
User preferences
User preferences is used to
• Set the language and on screen display options
according to your preferences
• Enable and set up Parental control
Languages
- Set values for the following:
• Menu Language, Audio Language, and
Subtitles Language
• Subtitles Mode:Translation, Hearing impaired, or
Off
- Press OK.
On-screen display
- Set values for the following:
• Banner timeout: banner display duration, from 3
to 10 seconds in steps of 1 second
• Volume bar display:Yes or No
• Volume bar timeout: volume bar display
duration, from 3 to 10 seconds in steps of 1 second
- Press OK.
Access Control
Access control is used to enable and set up parental
control options.To access this screen, you must enter
your PIN code.
- Set appropriate values for the following:
• Parental control: Enabled or Disabled
• Receiver lock, Setup menu lock, and Channel
lock
: select to Yes to enable PIN code protection
in order to prevent undesired use
• Maturity level: set a level from 1 to 18 to
prevent access to programmes which maturity
rating is higher
- Press OK.
DCR 2020_indice1 1/09/05 15:26 Page 60