Philips DCR 2020 - Manual (Page 33)

67
EN
The picture on some
channels seems to have been
stretched or squashed.
Even if you use the number
buttons, you cannot access a
particular channel.
You set a timer but did not
record what you wanted.
The order of the channels
has changed.
You have forgotten your
default PIN code
The broadcast is probably in
wide screen and the receiver
settings may not be correct.
The parental lock has been
activated on this channel and a
message asks for your PIN code.
The recorder was set
incorrectly.
They have been re-arranged.
Check the receiver TV format
setting, following the information in
paragraph TV Configuration. If you
have a wide screen TV, you may also
need to check the settings on your
TV.
Enter your PIN code to access the
channel or unlock it.
The default Pin code is 0000.
Make sure that your recorder is set
for the same time as your receiver.
Refer to paragraph Favourites lists
to change the order again.
The default PIN code is 0000.
Problem Possible cause Action
If you have tried all of the actions suggested above and could not solve the problem,
contact your customer service adviser.
DCR 2020_indice1 1/09/05 15:26 Page 67