Philips DCR 2020 - Manual (Page 13)

47
EN There are several ways you can connect and incorporate your digital receiver into
your existing audio/video equipment set up.
Before starting to connect:
- Unplug all equipment (TV set as well as VCR and/or DVD or DVD+R if required)
from the mains.
- Do not connect your digital receiver to mains supply now.
- Check your current wiring: you may not need to modify your existing audio/video
set up connections if they already match the connection diagrams below.
- Depending on your exiting set up, choose the best suited connection method for
incorporating your digital receiver.
When adding new equipment, be sure to refer to the related installation instructions
of the manual of the respective devices.
Connecting to TV and VCR/DVD player using
SCART Support
Screw the adapter supplied with your receiver on the “RF IN” connector of the rear panel.
Use the antenna cord type F-IEC supplied to connect your receiver to the VCR/DVD.
Use the SCART cable supplied to connect your receiver to the TV set.
For best DVD/VCR viewing, connect the DVD/VCR SCART EXT 1 directly to the TV
set SCART.
Connecting your receiver
to AC outlet
PHILIPS PHILIPS
TV set
VCR/DVD
Cable Receiver
IN FROM ANT
OUT TO ANT EXT 1
EXT 1 EXT 2
EXT 2
Cable Wall socket
For optimum configuration
DCR 2020_indice1 1/09/05 15:26 Page 47