Pioneer DVR-540H-S - Manual (Page 46)

Recording 05
46
En
Preventing use of the recorder
before a timer recording (child
lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it
into standby.
2 (front panel) Press and hold for
three seconds to lock the controls.
The front panel display briefly shows LOCK .
If any buttons are pressed on the remote or
front panel,
LOCK is briefly displayed again.
• To unlock the recorder, press and hold
STOP on the front panel (while the
recorder is stopped) for three seconds
until the display shows
UNLOCK .
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder
doesn’t start recording!
Check that the disc loaded or HDD is
recordable, not locked (see
Lock Disc on
page 103), and that there are fewer than
99/999 titles already on the DVD/HDD.
• The recorder won’t let me enter a timer
program! Why not?
You can’t enter a timer program if the
clock isn’t set.
• What happens when two or more timer
programs overlap?
Basically, the program with the earlier
recording start time has priority.
However, the recorder will start
recording the program with the later
start time after the earlier program is
finished. If two programs have the same
times (but different channels, for
example), the program set most recently
takes priority.
Simultaneous recording and
playback (Chase Play)
Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has
finished (i.e., playback is ‘chasing’ the
recording).
In fact, you’re not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you’re recording to the HDD) by
selecting it from the Disc Navigator screen
(see
Using the Disc Navigator with recordable
discs and the HDD on page 57).
• Press during recording to start
playback from the beginning of the
current recording
1
.
STANDBY/ON
Note
1 You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work
while copying or backing up.
HDD
PLAY
DVR640H_KU_EN.book 46 ページ ２００６年３月７日 火曜日 午後３時１８分