Pioneer DVR-540H-S - Manual (Page 36)

Recording 05
36
En
Using the built-in TV tuner
There are three different ways to select TV
channels. Note that you can’t change the TV
channel during playback, recording or
during recording standby.
• CHANNEL +/– buttons
• Number buttons
For example, to select channel 4, press 4
then ENTER ; for channel 34, press 3 , 4 ,
ENTER . 1
• CH +/– buttons on the front panel
Changing cable channels
When a cable box is connected, you can use
the remote to change cable channels (up to
999).
If your cable box is connected to the RF
antenna input on this recorder:
• Use or Change the
cable channel.
In this case, you can’t change the channel of
the built-in tuner.
If your cable box is connected to a set of AV
inputs:
1 Select the cable box input.
2 Use or to change the
cable channel.
Changing audio channels
Some TV programs are broadcast with both
a main and a Second Audio Program (SAP).
You can change the TV audio using the
AUDIO button.
• Press to change the audio type.
The current audio channel is displayed on-
screen.
• If SAP is selected, but there is no SAP
channel being broadcast, you will still
hear the main audio channel.
• If the sound is poor quality when set to
Stereo , you can often improve it by
changing to Mono .
Note
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the
LPCM
setting, only one channel of a dual mono
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Dual Mono Recording setting (see
Dual
Mono Recording on page 111).
Note
1 Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
CHANNEL +
CHANNEL –
GHI
PQRS TUV WXYZ
JKL
ABC DEF
MNO
CHANNEL +
CHANNEL –
GHI
PQRS TUV WXYZ
JKL
ABC DEF
MNO
INPUT SELECT
CHANNEL +
CHANNEL –
GHI
PQRS TUV WXYZ
JKL
ABC DEF
MNO
AUDIO
Mono SAP
Stereo
DVR640H_KU_EN.book 36 ページ ２００６年３月７日 火曜日 午後３時１８分