Philips Zenia Voice 6326 - Manual (Page 45)

System configuration 42
Base settings
Select "SETTINGS", and by using the key as well as the and scroll
keys, navigate through the menu to access the desired settings.
3.1 Selecting the ringer type (base station)
Go to the "SETTINGS" menu, then to the "System settings" sub-menu and
select "Base ringer".
Select the desired melody from the various options available, there are six for
6326 and seven for 6626 (including the personal ringer).
: For the personal ringer to be activated, it must first have been recorded (see
“4.4 Recording a personal ringer (Zenia Voice 6626 only)”, page 45).
3.2 Adjusting the ringer volume (base station)
Go to the "SETTINGS" menu, then to the "System settings" sub-menu and
select "Base volume".
Select the desired sound level from the five options available.
3.3 Setting date and time
Go to the "SETTINGS" menu, then to the "System settings" sub-menu and
select "Set date & time".
The handset prompts you to enter the date and time.
Enter the eight digits of the date and the four digits of the time; they will be
displayed.
Confirm by pressing the key.
A confirmation beep is heared and the message "Stored" is displayed.
Sub-menu Functions Shortcuts Settings Selection
3 Base settings 3.1 Base ringer (type) 3.1.1
3.1.2
3.1.3
3.1.4
3.1.5
3.1.6
3.1.7 Melody 1
Melody 2
Melody 3
Melody 4
Melody 5
Melody 6
Personal ringer
3.2 Base ringer 3.2.1
3.2.2
3.2.3
3.2.4
3.2.5 Silent
Low
Medium
High
Progressive
3.3 Set date & time Update (date/time for the whole
system)
3.4 Store direct dial keys
(6326 base station)
3.4.1
3.4.2
3.4.3
3.4.4
3.4.5
3.4.6
3.4.7 M 1
M 2
M 3
M 4
M 5
M 6
SOS
3.5 Registration mode Base station is put in registration
mode
prelim-zenia.book Page 42 Mardi, 20. juin 2000 10:31 10