Answering a call from the handset – Philips Zenia Voice 6326 User Manual
Page 17
Using the telephone
14
Making a call from the Zenia Voice 6626 base station
Press the
key.
The green light starts flashing and you hear the dial tone.
Dial the number using keys
to
on the keypad.
The number is dialled automatically.
The loudspeaker and the microphone of the base station are switched on
automatically. Speak in the direction of the microphone.
You can adjust the loudspeaker volume using the
(increase) or
(decrease) keys.
To hang up, press the
key again.
The green light stops flashing.
Answering a call from the handset
When an incoming call is received, the handset rings. The green light and the
t
symbol flash.
: You can stop the handset from ringing without answering the call by pressing
the
key. Your base station will continue ringing and the
symbol
appears.
: If the network supplies the caller's number, it appears on the screen. Also, the
name is shown if it is stored in one of the phonebooks.
To answer the call, press the
key. The
t symbol stops flashing.
: You can also press the
key to answer the call and switch on the handset
loudspeaker simultaneously.
To hang up, press the
key again.
: Caller indentification is subject to network selection.
RINGING
SILENCE
RINGING
01712345678
SILENCE
RINGING
SMITH
01712345678
SILENCE
prelim-zenia.book Page 14 Mardi, 20. juin 2000 10:31 10