Polycom SpectraLink 1725-36038-001 - Manual (Page 80)

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
80 PN: 1725-36038-001_B.doc
All syslog messages will include:
• Date and time (to 1/100th of second) since handset power on (The
handset time is set when it is powered on to Jan-1 00:00.00 GMT
adjusted. If it has obtained a time from the network time server,
that time will display instead.)
• Handset’s MAC address
• Handset’s IP address
• Sequence number
The table below lists the additional items in each message type:
Failed Handoff
(Sent whenever the handset
attempted to handoff, but failed
trying.) Failed AP MAC
Failed AP signal strength
Current AP MAC
Current AP signal strength
Failure reason
Successful Handoff New AP MAC
New AP signal strength
Old AP MAC
Old AP signal strength
Reason for handoff
Other candidate APs:
MAC
Signal strength
Reason not used
Security Error AP MAC
AP signal strength
Security mode
Error details (mode-dependent)
Call Start Call type (telephony, OAI, PTT)
AP MAC
AP signal strength
Call End AP MAC
AP signal strength