Polycom SpectraLink 1725-36038-001 User Manual

Page 28

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

PN: 1725-36038-001_B.doc

Daylight Savings

The handset may be adjusted for daylight savings time.

Password Enable/Disable/Change

The password option controls access to the Admin menu. It is enabled
by default with the password 123456. The

Password

option operates as

a toggle between

Enabled

and

Disabled

. The info line will display the

current state. Press

NavOK

to change the password protection state. To

modify the password requirement, the default or previously set
password must be entered to verify the change.

Change

Password

will

appear only if the password is enabled. The password is disabled by
default. The password must be set in each handset for which
controlled access is desired.

SIP Registration

Individual handsets may be configured to correspond with the SIP
configuration information in the TFTP server. The handset is then
automatically identified at startup. If username and password
information is not configured in the Admin menu, then this
information will be requested at startup
In either case, the username must agree with a corresponding
configuration file. See Chapter 5 Programming the SIP Handset Features,
section SIP TFTP Server Configuration Files.

allows you to specify a username and password for

automatically acquiring SIP configuration information. If no
username is specified, the SIP handset will request username and
password at startup and any additional registrations specified here
are ignored.
The username should correspond to the primary (line 1) dial number
assigned to the user. The username and password should also
correspond to the authentication credentials as created by your
system administrator for your primary line registration. Usernames or
passwords can be erased by selecting the item, then pressing the

Bksp

softkey and then the

Save

softkey.

Reg 2

Reg 3

, and

Reg 4

allow you to specify additional authentication

usernames and passwords that may be required by your handset for
any additional line appearances (registrations) that may appear in the
specific user’s configuration file. This information will be ignored if a

username is not provided.