Polycom SpectraLink 1725-36038-001 - Manual (Page 71)

PN: 1725-36038-001_B.doc 71
Testing a Handset
Verify proper registration and operation of each handset by
performing the following tests on each handset in an active wireless
area.
1. Power on the handset by pressing the
END key. A series of
messages will be displayed as the handset acquires the system.
The handset should display the user extension.
2. Place a call and listen to the audio quality. End the call by pressing
the END key.
3. Place a call to the handset and verify ring, answer, clear transmit,
and clear receive audio.
4. Use the softkeys to verify all softkey programmed features on the
handset.
5. Press the END key. Any line indicators should turn off and the
extension number display will return.
If any of these steps fails to operate as described, refer to Chapter 11
Troubleshooting for corrective action.
7