Panasonic CQ-C1300U - Manual (Page 5)

16
CQ-C1300U CQ-C1300U
17
Volume
Note:
≥ The volume level can be set independently for
each source. (For radio, one volume setting for
AM, one volume setting for all FMs)
Setting range: 0 to 40
(default: 18)
[VOL "]: Up
[VOL #]: Down
Down
Up
Point the remote control unit at the
remote control signal sensor.
General
Source
E
N
G
L
I
S
H
4
E
N
G
L
I
S
H
3
SQ (Sound Quality)
SQ is a function that can call up various sound
types at the touch of button in accordance with your
listening music type.
Press [SQ].
Power
Turn your car’s ignition key
to the ACC or ON position.
ON: Press [SRC] (POWER).
OFF: Press [SRC] (POWER) again and hold
for more than 1 second.
ACC
ON
Demonstration:
When the power is switched on for the fi rst time,
a demonstration appears on the display.
Press [DISP] (display) to change to regular
mode.
Note:
≥ To display the demonstration again, press and
hold [SRC] (source) for more than 4 seconds
when turning power on.
6 4
9 7
5
Car Audio
SOURCE
MUTE
POWER
RAND
VOL
3 1 2
DISP BAND
REP
6 5
SET
SEL
#
SCAN
MENU
NUMBER
8
0 [DISP]
(Display)
[SOURCE]
(Power/source)
[MUTE]
[VOL "]
[VOL #]
(Volume)
[SRC] (Source)
(POWER) indicator
Press [SRC] (source) to change the source.
[MUTE]
[VOLUME]
When a CD is in the player.
Radio (page 18)
CD player (page 21)
When a MP3/WMA data disc
is in the player.
MP3/WMA player (page 22)
When an optional CD changer
is connected.
CD changer control (page 26)
or
Flat frequency response:
does not emphasize. (default)
Speedy and heavy sound:
exaggerates bass and treble.
( lights.)
Wide-ranged and deep sound:
slightly emphasizes bass and
treble.
( lights.)
[DISP] (Display)
Scrolling
[SQ]
(Sound Quality)
Mute
ON: Press [MUTE]. ( lights.)
OFF: Press [MUTE] again.
No sounds.
Clear sound:
emphasizes middle tone and
slightly emphasizes treble.
( lights.)
Note:
≥ If no operation takes place for more than
2 seconds in SQ, the display returns to the regular
mode.
≥ The effect of SQ can be adjusted by bass/treble
adjustment. For some music sources or at some
volume levels, the sound quality is not desirable
because sound is distorted, or the effect is not
suffi cient because the BAS effect is limited. In
such cases, turn down the sound volume or
readjust the bass/treble setting.
≥ Please refer to page 28 for information on
bass/treble setting.