12 the video/audio adjust menu, The video/audio adjust menu, The video/audio adjust menu 12 – Pioneer DVR-531H-S User Manual
Page 89: Chapter 12, Choosing a preset, Creating your own set
The Video/Audio Adjust menu
12
89
En
Chapter 12
The Video/Audio Adjust menu
Using the Video/Audio Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc
playback, and for recording.
Setting the picture quality for TV and
external inputs
Picture Creation lets you choose a set of picture quality
settings for the built-in TV tuner and for each external
input. There are several preset settings that suit various
sources, or you can create up to three of your own sets.
Choosing a preset
1
With the recorder stopped, press HOME MENU
and select ‘Video/Audio Adjust’.
2
Select ‘Video Adjust’.
3
Use the
/
buttons to change the preset.
• Use the
INPUT SELECT
button to switch between the
built-in TV tuner and the external inputs.
• Use the
CH +/–
buttons to change the channel of the
built-in TV tuner.
There are six presets available:
•
Tuner
– suitable for general TV broadcasts
•
VCR
– suitable for video cassettes
•
LDP
– suitable for Laserdiscs
•
Memory1
– user preset 1
•
Memory2
– user preset 2
•
Memory3
– user preset 3
You can press
DISPLAY
to see the individual settings for
the current preset (
Tuner
,
VCR
or
LDP
).
4
Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings.
1
Follow
Choosing a preset
above and select one of
the user presets (Memory 1, 2 or 3).
2
Select ‘Detailed Settings’.
3
Use the
/
buttons to select the picture quality
setting you want to adjust.
You can adjust the following settings:
1
• Prog. Motion
– Adjusts the motion and still picture
quality when video output is set to progressive.
• PureCinema
– This setting optimizes the picture for
film material when the video output is set to
progressive. Usually this is best left set to
Auto
; try
switching to
Off
if the picture appears unnatural.
•
3-D Y/C
– Adjusts the brightness/color separation.
• YNR
– Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• CNR
– Adjusts the amount of noise reduction (NR)
applied to the C (color) component.
•
Detail
– Adjusts how sharp edges appear.
Timer Recording
Photo Viewer
Disc Navigator
Disc Setup
Initial Setup
Video/Audio Adjust
Play Mode
Copy
TV GUIDE
Detailed Settings
1ch
Tuner
Note
1.When the DV input is selected, only
Prog. Motion
and
PureCinema
settings can be adjusted.
Detailed Settings
1ch
Memory1
Memory1
Off
3D-Y/C
CNR
YNR
Motion
Still
Motion
Still
Detail
PureCinma
Prog. Motion
White AGC
Auto1
Max
Max
Off
Off
Min
Max
1ch
DVR-530H_KU.book 89 ページ ２００５年６月８日 水曜日 午前１１時１６分