Pioneer DVR-531H-S - Manual (Page 48)

Using the TV Guide On Screen™ interactive program guide 05
48
En
Troubleshooting
• My listings disappeared after a power failure.
You should start to receive listings again within 24
hours.
• Some channel numbers that appear are incorrect.
You can correct them using the Change Channel
Display option under Setup.
• I haven’t received any program listings.
Listings usually appear within 24 hours after
successfully setting up. It may take up to one week to
receive all eight days of listings. Your recorder must
be in standby mode to receive listing updates.
– Check the connections between the recorder,
cable, antenna and the IR cable if you’re using a
cable box.
– Verify the Setup information under Change system
settings.
– Make sure that your cable box is switched on (if
applicable).
• A show I set to record didn’t record.
– Make sure the recorder is in standby before the
recording is due to start.
– For DVD recording, make sure there is a recordable
DVD loaded.
– Check that the recording appears in the Schedule
listing.
• The TV Guide On Screen system didn’t automatically
tune to a show that I set a reminder for.
– Check that the reminder appears in the Schedule
listing.
– If you have a cable box, check the placement of the
IR cable.
• I set a reminder with auto-tune, but the channel didn’t
change.
– Check the Schedule and make sure that the show
is listed as a reminder.
– Highlight the show in the Listings screen, press
MENU then highlight edit reminder , then press
ENTER . Make sure that the Auto-tune option reads
Yes .
– The TV must be on when the reminder is due for
automatic channel tuning to work.
DVR-530H_KU.book 48 ページ ２００５年６月８日 水曜日 午前１１時１６分