Philips WAS5 - Manual (Page 20)

English
20
Reset
Reset
If desired, you can restore your Center or Station
to their default setting (including the network
setting).
When to reset Center or Station:
●
Resetting Center or Station helps to re-establish
the connection between Center and Station.
● To change the way your Center connects to PC,
you need to reset the Center (see the Option 1,
Option 2 or Option 3 in manual Connect to
your PC)
1
Check the set is switched on (See Basic
functions, Switching on/to standby and
selecting functions, Switching to Eco
power/ on)
2
Press and hold STOP • MENU to enter the
MENU screen (or on the remote control, press
MENU)
3
Use the navigation controls 3 or 4 and 2
to enter Settings
4
Use the navigation controls 3 or 4 and 2
to enter Restore settings
5
Press 3 or 4 and 2 to select Yes
➜
The set is rebooted. Language selection
screen appears
6
Select your desired language: English, French,
Spanish, Dutch, Italian and German
➜
The set enters Installation Mode
➜ The search for Center or Stations starts. The
Wi-Fi connection is being re-established
If the Center is reset and Stations are
not reset:
● On the Stations, enter Installation Mode by:
a. Remove the Station’s power plug and then,
connect it to the power supply again
➜ “Connecting to Center” appears
b. Press MENU or STOP to enter the selection
screen of Installation Mode and Select
Server
c. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
If a Station is reset and the Center is not:
● On the Center, select HD mode and then, enter
Installation Mode by:
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select Add New
Station
➜ Searching for Stations starts
If both Center and Stations are reset:
●
Do as you did in the first-time Wi-Fi connection
(see
the user manual for WACS5: Installation,
Set up Wi-Fi connection between Center
and Station)
7
On Center, press STOP Çto exit Installation
Mode when all your Stations are found
p001-p022_WAS5_Eng_22 9/30/2005, 16:48 20