Philips WAS5 - Manual (Page 15)

15
English
Preparation
Using the remote control
IMPORTANT!
– Remove the protective
plastic tab before using the
Station’s remote control.
– Always point the remote
control directly towards IR area .
To replace the battery
1
Press and hold 1 as indicated
2
Simultaneously, pull the battery tray at 4
3
Remove the old battery and put a new CR2025
battery in place
4
Put back the battery tray
CR 20 2 5 LI THIU
M
2
➠
3
1
CAUTION!
– Remove the battery if it is exhausted
or will not be used for a long time.
– Batteries contain chemical substances,
so they should be disposed of properly.
Using the navigation controls
When selecting options on the set’s screen, you
often need to use the navigation controls 1 / 2
/ 3 / 4.
1
Press 3 / 4 to highlight an option
2
Enter its submenu by pressing 2
3
Press 1 to return to the previous option list
screen
4
Press OK or 2 to confirm
p001-p022_WAS5_Eng_22 9/30/2005, 16:48 15