Philips WAS5 - Manual (Page 16)

English
16
Basic functions
Switching to standby/on
1
When the set is on, press STANDBY-ON/
ECO POWER to switch it to standby (or
y
on the remote control)
➜ Display shows GoodBye
➜
The Red indicator lights up
➜
Center: The screen dims out. Display shows
Station Status screen and the number of stations
found
➜ Station: Display shows Center Status
screen and the number of centers found
➜ The Center Status screen is empty if no
center is found
2
To switch on, press STANDBY-ON/ ECO
POWER (or
y on the remote control)
➜ The set switches to the last source selected
➜
The Green indicator lights up
Switching to power-saving mode
In the power-saving Eco power mode, the set’s
display and Wi-Fi connection are turned off.
1
When the set is on, press and hold STANDBY-
ON/ ECO POWER to switch it to Eco
power (or
y on the remote control).
➜ The display is switched off
➜ The Red indicator lights up
2
To switch on, press and hold STANDBY-ON/
ECO POWER (or
y on the remote control)
➜ The set switches to the last source selected
Helpful hints:
– In the standby/Eco power mode, the settings of
networking, display and language will be retained in
the set’s memory.
Auto-standby
● When the set has reached the end of playback/
recording and remains in the stop position for
more than 5 minutes, the set will switch to
standby automatically to save power.
Switching the blue indicator on/
off
The blue indicator lights up when the set is
switched on.
●
On the remote control, press and hold DIM to
turn the brightness on or off.
p001-p022_WAS5_Eng_22 9/30/2005, 16:48 16