Panasonic KX-FT34HK - Manual (Page 46)

– 46 –
Receiving Faxes
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select “EXT.TAM”.
5 Press .
6 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
MODE=EXT.TAM ▼ ▲
MODE=FAX ONLY ▼ ▲
START/COPY/SET
AUTO RECEIVE
0 5
1.SYSTEM SET UP
MENU
Change the AUTO RECEIVE setting from the FAX ONLY mode to the EXT.TAM mode.
1 2 3
4 5 6
7 8 9
0
Dial keypad MENU
START/COPY/SET
Changing the FAX ONLY mode to the EXT.TAM mode
1 Turn on the external answering machine.
2 Press on the unit until the FAX
indicator light turns on.
Display: EXT.TAM MODE
AUTO RECEIVE
FAX
AUTO RECEIVE
ON
Activating the EXT.TAM mode
Note:
● If the answering machine is not turned on, all incoming
calls will be answered by the unit and callers cannot
leave voice messages.
● Every time the unit receives a document, a silent
pause or fax tone may be recorded on the answering
machine.
● Set the TEL mode under the following conditions:
— when you wish to set the number of rings on the
answering machine to more than 5, or
— when you wish to use the auto transfer functions
(transfer, pager alert, etc.) on the answering
machine.
● Automatic fax sending cannot be received
automatically in the TEL mode.
Note:
● To return to the FAX ONLY mode, select
“FAX ONLY” in step 4.