Panasonic KX-FT34HK - Manual (Page 44)

– 44 –
Receiving Faxes
This setting determines the number of the extension telephone rings in the TEL/FAX mode. You can choose
from 1 to 4 rings.
When an extension telephone is not connected, changing this setting is not necessary.
Note:
● If the number of rings is increased, you may
not be able to receive documents from some
older model facsimiles which do not send a
fax calling tone.
● If you subscribe to a Caller ID service
(KX-FT34 only), set the ring count setting
to 2 or more rings.
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select the desired number.
5 Press .
6 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
RING=1 ▼ ▲
START/COPY/SET
TEL/FAX RING
0 9
1.SYSTEM SET UP
MENU
1 2 3
4 5 6
7 8 9
0
Dial keypad MENU
START/COPY/SET
When the unit detects a voice call in the TEL/FAX mode, it will ring up to 3 times. The number of rings can be
changed up to 9. If a voice call is not answered within the selected number of rings (3 to 9 rings), the unit will
automatically start to receive a fax.
Note:
● If the number of rings is increased, you may
not be able to receive documents from some
older model facsimiles which do not send a
fax calling tone.
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select the desired number.
5 Press .
6 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
RING=3 ▼ ▲
START/COPY/SET
SILENT FAX RING
3 0
1.SYSTEM SET UP
MENU
1 2 3
4 5 6
7 8 9
0
Dial keypad MENU
START/COPY/SET
Setting the TEL/FAX mode ring count
Setting the silent fax recognition ring count