Planar Dome EX - Manual (Page 32)

22 | Dome EX Display
Dome E5 Specification
In locations where 240V outlets are used, connect the Dome E5 display to only a center-
tapped, 240V, single-phase supply (for Canada and the United States).
Category Characteristic Item Specification
Screen Screen size diagonal 541 mm (21.3 in.)
Resolution 2048 x 2560 pixels (portrait)
2560 x 2048 pixels (landscape)
Pixel pitch 0.165 x 0.165 mm
Pixel arrangement LCR vertical stripe
Active area 422.40 (H) x 337.92 (V) mm
Grayscale supported 256 shades of gray, programmable gamma from
palette of up to 3061shades of gray
Refresh rate 50 Hz
Contrast ratio 600:1 (typical)
Brightness 750 cd/m 2 (typical), 600 cd/m 2 min.(when new)
Pixel rise/fall time 50 ms typical (25 ms Tr/25 ms Tf)
Viewing angle 170° (± 85°) horizontal/vertical
Interface Digital Video In DVI Rev. 1.0 single digital channel connector
Display control - brightness/contrast DDC2B+
Display identification EDID read using DDC2B+
USB hub Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Display status Dual-stack tricolor LEDs on back panel
Input formats Landscape orientation 2560 x 2048 (8- and 24-bit gray per pixel)
Portrait orientation 2048 x 2560 (8- and 24-bit gray per pixel)
VGA to XGA/SXGA 640 x 480 to 1024 x 768, displayed in both
landscape and portrait rotations
Screen type AMLCD (active-matrix liquid crystal display)
Physical Display size (without stand) 387 mm x 470 mm x 103 mm
(15.2 in. x 18.5 in. x 4.1 in.)
Display weight, typical 6.6 kg (14.5 lb) without stand
10.2 kg (22.5 lb) with stand
Mounting options Desktop stand (standard);
100-mm VESA mounting (optional)
Power Adapter Ault MW122RA1223F52 or Ault MW122KA1223F52
(CAUTION: Use only the adapter supplied with unit.)