Philips Mini-ITX Mainboard EPIA-MII - Manual (Page 17)

Chapter 2
2-2
CPU
The VIA EPIA-MII Mini-ITX Mainboard includes an embedded VIA Eden
Processor or VIA C3
TM E-Series Processor. The CPUFAN (CPU fan) and
SYSFAN (system fan) run on +12V and maintain system cooling. When
connecting the wire to the connectors, always be aware that the red wire is
the Positive and should be connected to the +12V. The black wire is Ground
and should be connected to GND. Both CPU and System fan connectors
have sensors to detect fan speed.
The VIA C3 TM E-Series Processor
With low power consumption and advanced
thermal dissipation properties, the embedded
VIA C3
TM E-Series requires only a small fan to
guarantee performance and reliability. Ensure
that the CPU Fan Connector is correctly
installed as shown.
CLE266
SYSFAN
Sensor
CPUFAN
+12V
GND
PWRFAN