Dvd and card management, E, r to select “other functions”, then, Video menu – Panasonic DIGA DMR-EA18 User Manual
Page 39: Audio menu, Other menu, Accessing the management menus, Tips

39
RQT9048
Setting Men
us
Video Menu
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
DVD-V
-RW(VR)
Picture
Set picture mode.
Normal: Default setting
Cinema: Mellows movies, enhances detail in dark scenes.
DNR (Digital Noise Reduction)
“On” reduces noise and picture degradation.
Progressive*¹ (Progressive/24p*²)
Select the method of conversion for progressive output to suit the
type of material being played.
Auto1 (normal): Film and video contents are detected
automatically and converted properly.
Auto2:
When using “Auto1” and video content is
distorted as shown below.
24p*²:
DVD-V
When this unit is connected to a TV supporting
1080/24p output via an HDMI cable, this unit displays each
frame at 1/24 second intervals – the frame interval originally
recorded in the film, thus faithfully reproducing the original
cinema image.
If the settings are changed, then the screen will darken for a
few seconds and then playback will start.
“Auto1” is set when you turn the unit off or open the disc tray.
*¹ Only when you have selected “480p” or higher for “Component
Output Signal” (
➔ 48) or “HDMI Resolution” (➔ 48)
*² Only when you have selected “On” in “24p Output for DVD-Video”
in Setup menu (
➔ 49)
Line-in NR (Only when IN1 or IN2 is selected)
Reduces video tape noise during recording. Depending on the video
signal, jittering may occur.
On:
Noise reduction works for any video input.
Off:
Noise reduction is off. Select when you want to record
input as is.
Audio Menu
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
DVD-V
-RW(VR)
V. Surround Sound (Dolby Digital with 2.0 or more
channels only)
This function does not work for SAP recordings.
Enjoy a surround-sound effect if you are using 2 front speakers
(L/R) only.
Turn off if it causes distortion.
Natural / Emphasis / Off
Dialog Enhancer (Dolby Digital, 3-channel or more
only, including a center channel)
When “On”, the volume of the center channel is raised to make
dialogue easier to hear.
Other Menu
Position
Change where this menu screen appears on your TV.
•
•
Accessing the Management Menus
Preparation:
RAM
SD
Release protection (disc, cartridge, card
➔ 40).
Insert a disc or card.
•
•
to select the drive
(DVD or SD).
With the unit stopped
e, r to select “Other Functions”,
then
Playback
Program
Delete
Other Functions
Flexible Recording
Playlists
DV Camcorder Rec.
DVD Management
Setup
FUNCTIONS
Cartridge Protection Off
Disc Protection Off
DVD-RAM
OK
e, r to select “DVD
Management” or “Card
Management”, then
SD
The only menu available in “Card
Management” is “Format memory card”.
Tips
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Continued on next page.
DVD and Card Management