Pitney Bowes DM200L User Manual
Page 11
Page 11 of 11
DM200L - Installing DM200L
Installation Instructions
SV61352 Rev. B
Troubleshooting
No Dial Tone -
Check that you are using an analog line such as:
a) Fax lines
b) Lines used by modems or credit card readers
c) Residential phone lines
Check that you have entered a dialing prefix if your phone
system needs a code to reach an outside line.
Cannot Reach Data Center -
Check that you have entered a dialing prefix if your phone
system needs a code to reach an outside line.
Not Enough Funds -
You have tried to add more postage than you have in your ac-
count at Pitney Bowes.
To change information entered during setup -
• Press Clear key on numeric keypad
• At Install Not Complete, either go back to the previ
ous step or return to the Install Start.
To clear the dialing prefix -
• Press Clear key on numeric keypad
• At Install Not Complete, select Continue at Last Step.
• At the Dialing Prefix screen, press the key followed by
the Enter key.