beautypg.com

Paradyne 6212-I1 User Manual

Page 19

background image

2. Hardware Installation and PC Setup

6212-A2-GB23-00

September 2005

2-3

Figure 2-1.

Hardware Installation

5. Turn on your PC and any other LAN devices, such as hubs or switches.

6. Turn on the router using its power switch.

7. Verify that the router's LEDs are illuminated as shown in

Table 2-1

.

If the LEDs are illuminated as expected, the router is working properly.

Table 2-1.

LED Indicators

This LED . . .

Should be:

POWER

Solid green to indicate that the device is turned on. If this light is not
on, check if the power adapter is attached to the router and plugged
into an AC power source.

STATUS

Solid green to indicate that the router can communicate with your ISP
via ADSL, or flashing when the router is trying to connect to your ISP.

ACTIVITY

Flashing when the device is sending or receiving data over the ADSL
connection.

LAN

Solid green to indicate that the device can communicate with your PC
via Ethernet, or flashing when the router is sending or receiving data
over Ethernet.

05-17712

CONSOLE

LINE

LAN 1

POWER

DEFAULT

RESET

LAN 2

LAN 3

LAN 4

Power

Switch