Pioneer Elite KURO PRO 151FD - Manual (Page 77)

77
En
04 Additional Picture and Sound Adjustment Options
PC Source -Power Management
When receiving signals from a PC, the panel can automatically enter Standby if the signal fails. Follow the steps
below to activate this function.
1 ) Access the Power Control through the Setup.
2 ) Select Power Management from the Power Control menu.
3 ) Select an option from the submenu.
Note: Pressing the remote’s TV () or the panel’s STANDBY/ON reactivates the flat panel TV.
4 ) Press HOME MENU to exit the menu.
These power management options are unavailable when a PC is connected to the panel through the HDMI port/
terminal.
Option Description
Off no power management (default)
On panel enters Standby when no signal is received
from the PC for
eight minutes; using the PC has no
effect on the panel
PRO151FD.book Page 77 Thursday, July 10, 2008 3:58 PM