Pioneer Elite KURO PRO 151FD - Manual (Page 23)

23
En
02 Install Your Flat Panel TV
2.3 Wall/Ceiling Mounting
Lay the 50” panel down on a raised surface then remove the stand.
Speaker cable
PRO-151FD with the speaker installed
Black
Black  Red 
Gray
Cable clamp
(PRO-111FD)
Cable clamp
• Before connecting the speakers to the flat panel TV, unplug
the panel from the power outlet. Connecting the speaker
cable with the power cord plugged in can cause
malfunction or damage to the panel if the cable’s bare wire
touches other equipment. Plug in the power cord after
connecting the speakers.
• Do not leave speaker cable wires bare and exposed at the
terminals. Exposed wires can result in an electrical short
causing malfunction or damage to the system.
• Do not connect any devices to the speaker terminals other
than the speakers specified.
Installation bolts (1)
Installation bolts (2)
PRO151FD.book Page 23 Thursday, July 10, 2008 3:58 PM