Philips ShowView MX5100VR/02 - Manual (Page 16)

Title Menu
1 Press DVD, then TITLE.
• The title menu will appear.
2 If the feature is not available, symbol may appear on the
TV screen.
3 Press Arrow ( L / K / B / s ) to select an item, and OK to
confirm selection.
• Playback will begin at the selected Title.
1 The title menu will appear.
2 Press numerical key pads to select the menu.
• Playback will start.
VCD
Basic Playback
Getting Started
Turn on the power of the TV, amplifier and any other compo-
nents which are connected to the DVD system.
Make sure the TV and audio receiver (commercially available)
are set to the correct channel.
1 Press STANDBY-ONy.
2 Press DVD, then OPEN/CLOSE A to open disc loading tray.
3 Place the chosen disc in the tray, with the
label facing up.
4 Press PLAY B B .
• The tray will close automatically, and
playback will then start from the first
chapter or track of the disc. If the play-
back does not start automatically, press
PLAY B.
• When you playback the DVD which a title menu is recorded,
it may appear on the screen. In this case, refer to “Title
Menu”.
5 Press STOP C to stop playback.
Notes:
- A “prohibited icon” may appear at the top-right on the
TV screen during operation, warning that
a prohibited operation has been encoun-
tered by the DVD system or the disc.
- With DVDs that use some titles for play-
back program signals, playback may start
from the second title, or it may skip these titles.
- During the playback of two layered disc, pictures may
stop for a moment.This happens when the 1st layer
switches to the 2nd layer.This is not a malfunction.
Cancelling and Calling Back PBC Function
1 Insert a Video CD.
• Playback will start automatically.
2 Press STOP C.
3 Press numerical key pads to enter the desired track number.
• PBC function is now cancelled and the playback of the Video
CD will start.
4 To call back PBC function, press STOP C twice, and then press
PLAY B B .
• Title menu will appear on the display.
POW ER ON/OF F
General Features
DVD or video CDs may contain menus to navigate the disc
and access special features. Press the appropriate numerical key
pads or use Arrow ( L / K / B / s ) to highlight your selection
in the DVD main menu and press OK to confirm.
Note:
- Unless stated, all operations described are based on
remote control use. Some operations can be carried out
using the menu bar on the TV screen.
DVD-V CD
Pause
1 During playback, press PAUSE k.
• Playback will pause and sound will be muted.
2 To continue playback, press PLAY B B .
DVD-V CD
Disc Menus
1 Press DVD, then DISC/VCR MENU.
• The DVD main menu will appear.
2 If the feature is not available, symbol may appear on the
TV screen.
3 If disc menu is available on the disc, audio language, subtitle
options, chapters for the title and other options will appear for
selection.
4 Press Arrow ( L / K / B / s ) to select an item, and OK to
confirm selection.
DVD-V
DVD-V
Calling Up a Menu During Playback
• Press DISC/VCR MENU to call up the DVD main menu.
• Press TITLE to call up the title menu.
Note:
- Contents of menus and corresponding menu operations
may vary between discs. Refer to the manual accompa-
nying the disc for details.
DVD-V
Step by Step Playback
1 During playback, press PAUSE k.
• Playback will pause and sound will be muted.
2 The disc goes forward by one frame each time PAUSE k is
pressed.
3 To exit step by step playback, press PLAY B.
DVD-V
Resume
1 During playback, press STOP C.
• Resume message will appear on the TV screen.
2 Press PLAY B, playback will resume from the point at which
playback was stopped.
• To cancel resume, press STOP C twice.
Notes:
- The resume information stays on even when the power
is turned off.
- Some Video CDs with PBC function resume playback
from the beginning of the track.
DVD-V CD
Fast Forward / Reverse Search
1 During playback, press FF g or REW h repeatedly to select the
required forward or reverse speed: x2, x8, x50, x100.
• For video CDs, the speed is fixed at x2, x8, x30.
• For audio CDs, the speed is fixed at x16.
• For MP3, the speed is fixed at x8.
2 To return to normal playback, press PLAY B.
DVD-V CD MP3
Slow Forward / Slow Reverse
1 During playback, press PAUSE k.
2 Press FF g or REW h .
• Slow motion playback will begin and sound will be muted.
3 Press FF g or REW h repeatedly to select the required
speed: 1/16, 1/8, 1/2 of the normal playback.
4 To return to normal playback, press PLAY B.
Note:
- Slow Reverse is not available on video CDs.
DVD-V
VCD
VCD
VCD
VCD
VCD
VCD
VCD
16
English
Playing a Disc
E9017FD_EN.qx3 03.8.6 10:13 AM Page 16