Displaying disc titles 21, Using cd text functions, Displaying text information on cd text – Pioneer SUPER TUNER III D DEH-P8850MP User Manual
Page 21: Discs, Scrolling text information in the, Display, Selecting tracks from the track title, List, Built-in cd player
Black plate (21,1)
Displaying disc titles
You can display the text information of any
disc that has had a disc title entered.
% Press DISPLAY.
Press
DISPLAY repeatedly to switch between
the following settings:
: disc title
—Simple display
Using CD TEXT functions
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artist
’s name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
Displaying text information on
CD TEXT discs
You can display the text information of any
disc that has had a disc title entered.
% Press DISPLAY.
Press
DISPLAY repeatedly to switch between
the following settings:
: disc title
— : disc artist name— : track
title
— : track artist name— : disc title and
: disc artist name
— : track title and :
track artist name
—Simple display
# If specific information has not been recorded
on a CD TEXT disc, title or name is not displayed.
Scrolling text information in
the display
This unit can display the first 24 letters of disc
title, disc artist name, track title and track ar-
tist name. When the text information is longer
than 24 letters, you can scroll the text informa-
tion as follows.
! When the source icon is turned off, this
unit can display the first 30 letters of text in-
formation.
% Press DISPLAY and hold until the text
information begins to scroll through the
display.
The titles scroll.
Note
When Ever Scroll is set to ON at the initial setting,
text information scrolls continuously in the dis-
play. Refer to Switching the Ever Scroll on page 63.
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
1
Press LIST to switch to the track title list
mode.
2
Use MULTI-CONTROL to select the de-
sired track title.
Turn to change the track title; press to play.
# You can also change the track title by pushing
MULTI-CONTROL up or down.
# If you do not operate the list within about 30
seconds, the track title list mode is canceled
automatically.
Built-in CD Player
En
21
English
Section
05