Pioneer DEH P4200UB - Manual (Page 22)

Taking a phone call
Answering or rejecting an incoming call
Answering an incoming call
1 When a call comes in, press M.C.
! You can also perform this operation by push-
ing M.C. up.
End a call
1 Push M.C. down.
Rejecting an incoming call
1 When a call comes in, push M.C. down.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Operating a call waiting
Answering a call waiting
1 When a call comes in, press M.C.
! You can also perform this operation by push-
ing M.C. up.
End all calls
1 Push M.C. down.
Switch between callers on hold
1 Press M.C.
! You can also perform this operation by push-
ing M.C. up.
Rejecting call waiting
1 Push M.C. down.
Notes
! Pushing M.C. down ends all calls including
calls waiting on line.
! To end the call, both you and your caller need
to hang up the phone.
Function and operation
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Search & Connect (searching for available cellular
phone)
! This function cannnot be operatad when the cellu-
lar phone is connected.
1 Press M.C. to search for available cellular phones.
While searching, Searching flashes. When avail-
able cellular phones featuring Bluetooth wireless
technology are found, device name or
Name not
found (if names cannot be obtained) is displayed.
! If this unit fails to find any available cellular
phones, Not found is displayed.
2 Push M.C. up or down to select a device name
you want to connect.
3 Press M.C. to connect the selected cellular
phone.
While connecting,
Connecting flashes. To com-
plete the connection, check the device name
(
Pioneer BT Unit) and enter the link code on your
cellular phone. If the connection is established,
Connected is displayed.
! PIN code is set to 0000 as the default. You
can change this code. Refer to
Pin code input (PIN code input) on page 16.
Connection open (connecting from cellular phone)
! This function cannnot be operatad when the cellu-
lar phone is connected.
1 Press M.C. to open the connection.
Disconnect phone (disconnecting a cellular phone)
! This function cannot be operated when the cellu-
lar phone is not conntected.
1 Press M.C. to disconnect a cellular phone from
this unit.
After disconnection is completed,
Disconnected
is displayed.
Connect phone (connecting a registered cellular
phone)
Available accessories
En
22
Section
03