Radio, One-touch selection of a station, Preset station calling – Panasonic CQ-VD7200U User Manual
Page 16: Tuning, Radio mode, Band, Navigation aspect p·mode power, Disc track/ channel

34
35
1
E
N
G
L
I
S
H
1
E
N
G
L
I
S
H
CQ-VD7200U
CQ-VD7200U
26
E
N
G
L
I
S
H
25
E
N
G
L
I
S
H
Radio
One-touch Selection of a Station
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Select a band and frequency. (step
w and e on the previous page)
Press and hold [1] to [6] on the remote control for more than 2 seconds.
The frequency blinks once, and
a receiving station is saved in
the memory.
Auto Preset
Memory
Select a band. (step
w on the previous page)
Press and hold [ENTER] for more than 2 seconds.
¡The 6 strongest available stations will be automatically saved in the
memory under preset numbers 1 to 6.
¡Once set, the preset stations are sequentially scanned for 5 seconds
each.
¡To stop the scanning, press [1] to [6] on the remote control.
Preset Station
Calling
Select a band. (step
w on the previous page)
Press [1] to [6] on the remote control.
Note: New stations overwrite existing saved stations after following this procedure.
VOLUME
MENU
MUTE
MODE
NAVI
NAVIGATION
ASPECT
P·MODE
POWER
ASP
ENTER
CQ-VD7200U
IN-DASH 7 INCH WIDE COLOR LCD TV / DVD - VIDEO / RECEIVER
DISC
TRACK/
CHANNEL
MODE
ENTER
Tuning
[[]: up
[]]: down
Press and hold [[] or []] for more than 0.5 sec-
onds, then release. Seeking will start and stops at next
available station.
Radio Mode
Press [MODE] to change to radio mode.
Band
Press [ENTER] to change
the bands.
Note: The stereo indicator lights during reception of
an FM stereo broadcast.
1
2
3
[1] to [6]
(Preset memory)
Band
Mode display
Stereo indicator
[MODE]
Preset memory
Frequency
Band list
[]] [[] (Tuning)
[ENTER] (Band)
[]] [[]
(Tuning)
[ENTER]
(Band)
[MODE]
FM1
FM2
FM3
AM