Panasonic SCPT1050 - Manual (Page 31)

R
QTX
00
64
31
XM channels can be selected manually by directly entering the XM
channel number.
XM channels are organized into categories such as Rock, Classical, Country
and Dance to make browsing and selecting channels easier.
[Note]
Some XM channels belong to two categories; a primary and secondary
category, either of which can be used for XM channel selection. Although
you may have selected an XM channel from its secondary category (e.g.
DANCE), after exiting and then re-entering category tune mode, the
primary category of the XM channel is displayed (e.g. DECADES).
Channel presets allow you to quickly and conveniently select your favorite
XM channels. Up to 30 XM channels can be stored as channel presets.
∫ Selecting the preset channels
1 When “XM” is selected
Press [PLAY MODE] §4 to select “PRESET”.
Each time you press the button: MANUAL ()PRESET
2 Press the numbered buttons to select the desired channel
preset.
≥ To select a 2-digit number
e.g. 12: [ S10] ➜ [1] ➜ [2]
Alternatively, press [ X, W].
The XM channel information display can be changed.
While listening to the XM radio broadcast
Press [FL DISPLAY].
Each time you press the button:
XM channel number
-----------------------.
XM channel name (factory preset)
^----
ARTIST NAME
,----
SONG TITLE
,----
CATEGORY
,----}
Longer text information will not be fully displayed.
[Note]
≥ If there is no text information for the current XM broadcast, “----” is
displayed.
≥ Even if the main unit is turned off, or another source is selected, the
setting of channel information will be retained.
≥ The XM channel number and name are displayed briefly whenever the
XM channel is changed.
Selecting XM channels by direct entry
1 Press [TUNER/BAND] §1 to select “XM”.
2 Press [PLAY MODE] §4 to select “MANUAL”.
Each time you press the button: MANUAL ()PRESET
3 Press the numbered buttons to select the XM channel.
≥ To select a 2-digit or 3-digit number
e.g.12: [ S10] ➜ [1] ➜ [2]
125: [ S10] ➜ [S10] ➜ [1] ➜ [2] ➜ [5].
Alternatively, press [ 6, 5] §2 to select the desired XM channel.
≥ Press and hold [6, 5] §2 to scan through quickly.
Selecting XM channels by category
1 Press [TUNER/BAND] §1 to select “XM”.
2 Press [ 3, 4, 2, 1] to enter category tune mode.
The category of the current XM channel flashes on the display.
3 While the category is flashing
Press [ 3, 4] to select a category.
Available categories vary according to broadcasting hours.
≥ Press and hold [3, 4] to scan through quickly.
4 While the selected category is flashing
Press [ 2, 1] to select a channel in the current category.
The XM channel number and name are displayed briefly, and then
the current category flashes on the display.
5 Press [ENTER] to exit category tune mode.
The XM channel information will be displayed.
DISC S.SRD TG KARA D.MIX MONO SLP STCT USB
MODE
RDS RND PGM
EQ
PRG SRDE.
PL DDTS
CD
DVD
W1 W2 WS
DISC S.SRD TG KARA D.MIX MONO SLP STCT USB
MODE
RDS RND PGM
EQ
PRG SRDE.
PL DDTS
CD
DVD
W1 W2 WS
DISC S.SRD TG KARA D.MIX MONO SLP STCT USB
MODE
RDS RND PGM
EQ
PRG SRDE.
PL DDTS
CD
DVD
W1 W2 WS
e.g.
Presetting the XM channels
1 While listening to the XM radio broadcast
Press [ENTER] §3 .
2 While the XM channel and “PGM” are flashing on the display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [ S10] ➜ [1] ➜ [2]
Alternatively, press [ X, W] and then press [ENTER] §3 .
≥ An XM channel previously stored is overwritten when another XM
channel is stored in the same channel preset.
≥ XM channel 0 (RADIO ID) cannot be stored as a channel preset.
Selecting the XM channel information
DISC S.SRD TG KARA D.MIX MONO SLP STCT USB
MODE
RDS RND PGM
EQ
PRG SRDE.
PL DDTS
CD
DVD
W1 W2 WS
DISC S.SRD TG KARA D.MIX MONO SLP STCT USB
MODE
RDS RND PGM
EQ
PRG SRDE.
PL DDTS
CD
DVD
W1 W2 WS
Using the
XM
®
Satell
ite Radi
o
PT950 and 1050_En.book Page 31 Sunday, December 10, 2006 10:25 PM