Playing discs, Basic play, Start play – Panasonic SCPT1050 User Manual
Page 16: Open the drawer and place the disc(s), Select “dvd/cd, Power on, Close the drawer
RQ
TX00
64
16
Bas
ic pla
y
Basic play
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥ To change your television’s video input mode, refer to its operating instructions.
[Note[
≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit’s motor and your television screen, press [
∫] (Stop)
when you are finished with the menus.
≥ Total title number may not be displayed properly on iR/iRW.
Using the main unit
POWER
5 DISC SELECTOR
SELECTOR
TUNING
TUNE MODE
FM MODE MEMORY
MUSIC PORT
VOLUME
SKIP
EXCHANGE
DISC
OPEN CLOSE
1
2
3
4
5
SETUP MIC
DISC SKIP
DISC EXCHANGE
SELECTOR
POWER
OPEN CLOSE
OPEN CLOSE
5 DISC SELECTOR
1
2
3
4
5
+, VOLUME
5
Start play.
≥ Press [r, s VOLUME] to adjust
the volume.
≥ You can enjoy surround sound
when you press [
ÎPLII/S.SRD]
to turn on Dolby Pro Logic II
(
➜ page 32).
3
Open the drawer and place the disc(s).
≥ Load double-sided discs so the label for the side you want to
play is facing up.
≥ To load discs on the other trays, press [DISC SKIP] on the
main unit.
≥ Play will start from the disc in the front-left position of the
tray.
≥ For DVD-RAM, remove the disc
from its cartridge before use.
≥ Do not:
– load more than one disc per tray.
– touch the drawer or the carousel while they are in motion.
– rotate the carousel by hand.
– close the drawer by hand.
∫ (Stop)
Press to select a disc directly.
≥ You can also select the disc using the remote
control (
➜ page 18, Checking and selecting
the disc).
2
Select “DVD/CD”.
1
Power on.
4
Close the drawer.
Press to skip.
Press and hold to
– search during play
– start slow-motion play during pause
(Motion picture part)
≥ Press [1] (Play) to start normal play.
Select the
next disc
tray
Exchange the
disc in the
play position
≥ The drawer opens and the disc
in the play position comes to the
front-left position.
≥ Press the button again to play
the disc after changing the disc
in the front-left position.
SKIP
DISC
—
EXCHANGE
DISC
Change the
other discs
without
interrupting
play
≥ Each time you press [DISC
SKIP], you can select the other
trays.
OPEN CLOSE
OPEN CLOSE
SKIP
DISC
Change the
discs
PT950 and 1050_En.book Page 16 Tuesday, December 26, 2006 3:37 PM