Pioneer MILESTONE 12 - Manual (Page 51)

51
Video Card: PDA-5003/PDA-5004
4 Affix the accessory connector indicator label to the
Plasma Display then affix the remote control label
to the remote control that is furnished with the
Plasma Display.
Notes
Note
Use a soft cloth to gently wipe away any dust or soiling
from the surface before affixing the label.
Video Card Removal (Be careful not to insert
and remove it frequently).
1 Remove the two screws holding the video card.
AUDIO INPUT5 INPUT 3/4 AUDIO VIDEO ANALOG RGB
HD (H/V SYNC)
S-VIDEO INPUT3 INPUT4
2 Holding the inside tabs, pull the video card straight
out.
AUDIO INPUT5 INPUT 3/4 AUDIO VIDEO ANALOG RGB
HD (H/V SYNC)
S-VIDEO INPUT3 INPUT4
Impedance
selector switch
75 Ω 2.2 k Ω
Device
mounting
surface
AUDIO INPUT5 INPUT 3/4 AUDIO VIDEO ANALOG RGB
HD (H/V SYNC)
S-VIDEO INPUT3 INPUT4
INPUT3
S-VIDEO VIDEO INPUT3/4 ANALOG RGB AUDIO (ON SYNC) (H/V SYNC) IN OUT R L R L G B R HD VD
INPUT4 INPUT5 AUDIO
RGB (BNC)
COMPONENT
PDA-5003
PDA-5004