Pioneer MILESTONE 12 User Manual
Page 12
12
Controls and Connectors
Video Card
The video card provides three video input connectors,
one video output connector, and three audio input
connectors. Consult the pages noted in parentheses ( )
for details regarding connections to the various jacks
and connectors.
^
S-VIDEO (INPUT3) (S-video jack)
Use this jack to connect components that have an
S-video output jack such as a video deck, video
camera, laser disc player, or DVD recorder.
&
AUDIO R/L (INPUT3) (RCA Pin jacks)
Use this jack to obtain sound when INPUT3 is
selected.
Connect these jacks to the component’s audio
outputs that are connected to the video card’s
INPUT3.
*
VIDEO IN (INPUT4) (RCA Pin jack)
Use this jack to connect components that have a
composite video output jack such as a video deck,
video camera, laser disc player, or DVD recorder.
(
VIDEO OUT (INPUT4) (RCA Pin jack)
Use this jack to output the video signal to an
external monitor or other component.
Note
The video signal is not output from the VIDEO OUT
(INPUT4) jack when the display is OFF or in Standby.
)
AUDIO R/L (INPUT4) (RCA Pin jacks)
Use this jack to obtain sound when INPUT4 is
selected.
Connect these jacks to the component’s audio
outputs that are connected to the video card’s
INPUT4.
_
COMPONENT VIDEO (INPUT5) (RCA Pin jacks)
Use this jack to connect devices that have
component video output jacks such as DVD
recorders.
+
AUDIO R/L (INPUT5) (RCA Pin jacks)
Use this jack to obtain sound when INPUT5 is
selected.
Connect these jacks to the device’s audio outputs
that are connected to the video card’s INPUT5.
Video Card
The video card provides three video input connectors,
one video output connector, and two audio input
connectors. Consult the pages noted in parentheses ( )
for details regarding connections to the various jacks
and connectors.
~
S-VIDEO (INPUT3) (S-video jack)
Use this jack to connect components that have an
S-video output jack such as a video deck, video
camera, laser disc player, or DVD recorder.
!
VIDEO IN (INPUT4) (BNC jack)
Use this jack to connect components that have a
composite video output jack such as a video deck,
video camera, laser disc player, or DVD recorder.
@
VIDEO OUT (INPUT4) (BNC jack)
Use this jack to output the video signal to an
external monitor or other component.
Note
The video signal is not output from the VIDEO OUT
(INPUT4) jack when the display is OFF or in the Standby
mode.
#
AUDIO R/L (INPUT3/4) (RCA Pin jacks)
Use this jack to obtain sound when INPUT3 or
INPUT4 is selected. Connect these jacks to the
component’s audio outputs that are connected to
the video card’s INPUT3 or INPUT4.
$
ANALOG RGB (INPUT5) (BNC jacks)
Use this jack to connect components equipped with
RGB outputs jacks such as personal computers,
external RGB decoders, or components equipped
with component output jacks such as DVD
recorders. Verify that the connection corresponds to
the signal output from the connected component.
%
AUDIO R/L (INPUT5) (RCA Pin jacks)
Use this jack to obtain sound when INPUT5 is
selected.
Connect these jacks to the component’s audio
outputs that are connected to the video card’s
INPUT5.