Pioneer DVR-640H-S - Manual (Page 54)

Playback 06
54
En
3 Start playback.
• If you’re playing a DVD-Video or Video
CD, a disc menu may appear when you
start playback. Use the
/ / /
buttons and ENTER to navigate DVD disc
menus, and the number buttons and
ENTER for Video CD menus.
• When playing video from the HDD,
playback will automatically stop after the
end of a title is reached.
• There may be a slight pause when
playback switches from the first to the
second layer of a dual-layer disc.
• See the following sections for more
details on playing specific kinds of discs.
4 Press to stop playback.
5 When you’ve finished using the
recorder, eject the disc and switch the
recorder back into standby.
Playing DVD discs
The table below shows the basic playback
controls for DVD-Video, and recordable DVD
discs.
PLAY
STOP
Press to start playback.
If
RESUME is displayed on-
screen, playback starts from
the place last stopped.
Press to stop playback.
You can resume playback from
the same point by pressing
PLAY . (Press STOP again to
cancel the resume function.)
Pauses playback, or restarts
playback when paused.
Press to start scanning. Press
repeatedly to increase the scan-
ning speed.
Press to skip to previous/next
chapter/title. (During playback
you can also use the front panel
CH +/– buttons.)
DVD+R/DVD+RW only:
PREV may not always skip to
the previous title.
Except VR mode: During play-
back, enter a chapter number
then press
ENTER to skip
directly to that chapter within
the currently playing title.
On some discs, you can also
use the number buttons to
select numbered items in the
disc menu.
VR mode only: During playback,
enter a title number then press
ENTER .
All: Press CLEAR to clear a
number entry and start again.
PLAY
STOP
PAUSE
REV SCAN FWD SCAN
PREV NEXT
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
CLEAR
CLEAR
ENTER
DVR640H_WPW_EN.book 54 ページ ２００６年４月１１日 火曜日 午前９時４４分