Pioneer DVR-640H-S - Manual (Page 28)

Getting started 04
28
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first
time, you can make several basic settings
using the Setup Navigator feature. This takes
you through setting the clock, the internal TV
tuner and the video output.
If you’re using the recorder for the first time,
we strongly recommend you use the Setup
Navigator before starting to use the
recorder.
Important
• Some of the Setup Navigator on-screen
displays (OSDs) in this section vary
slightly depending on the country or
region of purchase.
1 Switch on your TV and set the video
input to this recorder.
2 Switch on the recorder.
When you switch on for the first time, your
TV should display the Setup Navigator
screen (If the Setup Navigator doesn’t
appear, you can also access it from the
Initial Setup menu; see page 110).
3 Choose a language (then
press ENTER).
4 Start the Setup Navigator.
• If you don’t want to use the Setup
Navigator, press to select Cancel ,
then press ENTER to exit the Setup
Navigator.
5 Select the ‘Auto Scan’ then
press ENTER.
• Select Do not set if you want to skip
channel setup (because they have
already been set up, for example).
STANDBY/ON
ENTER
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Clock
Input Line System
Power Save
Help
Setup Navigator
Basic
Setup Navigator
English
Español
Language
Italiano
Português
ENTER
k Setting
t Line System
er Save
P
p Navigator p Navigator
Start
Cancel
Start
Complete this setup before you
start using your recorder.
Please use the Initial Setup if you
want to make more detailed settings.
ENTER
k Setting
Line System
er Save
P
Auto Channel Setting
English
Do not Set
Auto Scan
DVR640H_WPW_EN.book 28 ページ ２００６年４月１１日 火曜日 午前９時４４分