Pioneer DVR-640H-S - Manual (Page 111)

The Initial Setup menu 14
111
En
HELP Setting On • Switches on the automatic Help screens for GUI dis-
plays.
Off Switches off the automatic Help screens for GUI dis-
plays. (Press
HELP on the remote to manually display
the Help screen.)
Setup Navigator Start Select to start the Setup Navigator. See also Switch-
ing on and setting up on page 28 .
Tuner
Auto Channel
Setting Next Screen Proceed to the next screen, select your country, then
wait for automatic tuning to complete. The channel
mapping screen should appear when the recorder is
set up. Press
ENTER to exit this screen.
Manual CH Setting Next Screen Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
PREV /
NEXT buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the
Skip
setting to On .
• Set the CH SYSTEM setting to match the channel
system of your country or region.
• Set the
CHANNEL setting to the channel you want
to assign to the current channel preset.
• To manually fine tune the channel, change the
AFT
setting to Off then adjust the Level setting.
• Set the Sound System setting to match the
sound system of your region.
• The Name field allows you to input a name of up to
five characters for the current channel preset.
Channel Swapping Next Screen Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press
ENTER .
Setting Options Explanation
DVR640H_WPW_EN.book 111 ページ ２００６年４月１１日 火曜日 午前９時４４分