Epson GT-30000 - Manual (Page 81)

3
Installing the Software 3-41
R4C3820
Rev. C
A5 size INSTALL.FM
4/9/01 Pass 0
R Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
Note:
View the screen from a short distance. While the gray stripes do not
blend perfectly well, try to adjust until the different tones match as
closely as possible.
3. Click OK to register the calibration setting.
4. When the message Setup is complete appears, click OK .
Screen calibration is not required any more until you change to a
different monitor.
Selecting Scanners
If several EPSON TWAIN HS-compliant scanners are connected
to your PC, or you are to use the scanner in a networked
configuration, follow the instructions below to select the default
scanner you want to use.
Note:
If you use different interface connections, you can only connect and use
scanners that are of the same model.