Epson GT-30000 - Manual (Page 29)

2
Setting up the Scanner 2-9
R4C3820
Rev. C
A5 size SETUP.FM
4/9/01 Pass 0
R Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
Plugging in the Scanner
1. Make sure that the scanner is turned off. The scanner is off
when the OPERATE button is raised (not depressed).
2. If the power cord is not attached to the scanner, connect it to
the AC socket on the back of the scanner, and plug the other
end into a properly grounded wall outlet.
c
Caution:
It is not possible to change the scanner's voltage. If the label on the
back of the scanner does not show the correct voltage for your
country, contact your dealer. Do not plug in the power cord.