Epson GT-30000 - Manual (Page 125)

6
Option 6-3
R4C3820
Rev. C
A5 size OPTIONS.FM
4/9/01 Pass 0
R Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
1. Turn off the scanner. Unplug any power cords, then
disconnect all cables from the back panel of your scanner.
2. Use a cross-head screwdriver to remove the two screws
securing the shield plate to the optional interface slot; then
remove the plate. Be sure to keep both screws; you may need
to use them again if you re-install the shield plate.
c
Caution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your scanner before handling the interface board.
3. Insert the interface board along the side guide rails into the
expansion slot in the optional interface slot.