Remote control operation guide, Changing the remote control code, Remote control operation guide/specifications – Panasonic SC-HT65 User Manual
Page 22

22
RQTV0225
Specifications (DIN 45 500)
g
AMPLIFIER SECTION
RMS output power of each channel driven
10 % total harmonic distortion
1 kHz front CH
125 W per channel (3 Ω)
1 kHz surround CH
125 W per channel (3 Ω)
1 kHz center CH
250 W per channel (6 Ω)
100 Hz subwoofer CH
250 W per channel (6 Ω)
Total RMS output power
1000 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Dolby Digital mode)
1kHz front CH
75 W per channel (3 Ω)
1kHz surround CH
75 W per channel (3 Ω)
1kHz center CH
150 W per channel (6 Ω
)
100 Hz subwoofer CH
150 W per channel (6 Ω)
Total RMS output power
600 W
Total harmonic distortion
Half power at 1 kHz (Front CH)
0.5 % (3 Ω)
Input sensitivity
DVD-P, TV, BD/DVR
450 mV, IHF'66
S/N at rated power (3 Ω)
DVD-P, TV, BD/DVR
80 dB (85 dB, IHF'66)
Input impedance
DVD-P, TV, BD/DVR
47 kΩ
Tone controls
BASS
50 Hz, +6 to -6 dB
TREBLE
20 kHz, +6 to -6 dB
g
FM TUNER SECTION
Frequency range
87.50 MHz to 108.00 MHz
Sensitivity
S/N 30 dB
1.9 µV/75 Ω
S/N 26 dB
1.8 µV/75 Ω
S/N 20 dB
1.6 µV/75 Ω
IHF usable sensitivity
(IHF '58) 2.2 µV/75 Ω
IHF 46 dB stereo quieting sensitivity
22 µV/75 Ω
Total harmonic distortion
MONO
0.2%
STEREO
0.3%
S/N
MONO
60 dB (71 dB, IHF)
STEREO
58 dB (65 dB, IHF)
Frequency response
20 Hz to 15 kHz, +1 dB, -2 dB
Image rejection at 98 MHz
40 dB
IF rejection at 98 MHz
70 dB
Stereo separation (1 kHz)
40 dB
Antenna terminal
75 Ω (unbalanced)
g
AM TUNER SECTION
Frequency range
522 kHz to 1611 kHz (9 kHz steps)
530 kHz to 1620 kHz (10 kHz steps)
Sensitivity
500 µV/m
Selectivity (at 999 kHz)
30 dB
g
SPEAKER SECTION
Front speaker (SB-HF550)
Type
1 Way, 1 Speaker
Speaker unit
Full range
6.5 cm cone type
Input power (IEC)
125 W (Max/3 Ω)
Output sound pressure level
80 dB/W (1.0 m)
Frequency range
76 Hz to 25 kHz (-16 dB)
89 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
252 mm x 1123 mm x 235 mm
Mass
3.7 k
g
Surround speaker (SB-HS550)
Type
1 Way, 1 Speaker
Speaker unit
Full range
6.5 cm cone type
Input power (IEC)
125 W (Max/3 Ω)
Output sound pressure level
80 dB/W (1.0 m)
Frequency range
95 Hz to 25 kHz (-16 dB)
120 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
92 mm x 142 mm x 95 mm
Mass
0.6 k
g
Center speaker (SB-HC550)
Type
2 Way, 2 Speakers
Speaker unit
Full range
6.5 cm cone type x 2
Input power (IEC)
250 W (Max/6 Ω)
Output sound pressure level
82 dB/W (1.0 m)
Crossover frequency
5 kHz
Frequency range
80 Hz to 25 kHz (-16 dB)
96 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
270 mm x 94 mm x 95 mm
Mass
1.3 k
g
Subwoofer (SB-HW550)
Type
1 Way, 1 Speaker
Speaker unit (Woofer)
16 cm cone type
Output sound pressure level
81 dB/W (1.0 m)
Frequency range
31 Hz to 220 Hz (-16 dB)
37 Hz to 180 Hz (-10 dB)
Dimensions (W x H x D)
153 mm x 415 mm x 257 mm
Mass
3.6 k
g
g
GENERAL
Power supply
AC 230 V to 240 V, 50 Hz
Power consumption
135 W
Dimensions (W x H x D)
430 mm x 105 mm x 388 mm
Mass
4.1 k
g
Power consumption in standby mode:
1 W
Notes:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Digital input OPTICAL
2
COAXIAL
1
HDMI Input
2
HDMI Output
1
Wireless Ready
SH-FX65GN-K
Changing the remote control code
Change the code if you find the
remote control unintentionally also
controls other Panasonic equipment.
Do the following to set the remote
control code and this unit’s remote
control mode to the same one.
Change the main unit’s mode
Change the remote control’s code
To restore the code to “1”
On the main unit: In step 3, select
“1”.
On the remote control: In step 6, while
pressing [OK], press and hold [1] for about
2 seconds.
•
•
INPUT SELECTOR
TUNE
MENU
RETURN
SETUP
SETUP MIC
VOLUME
ENTER
AUTO
SPEAKER SETUP
TUNE
MENU
RETURN
SETUP
ENTER
1. Enter the SETUP menu.
Press and hold
.
2. Select and press [ENTER].
3. Select and press [ENTER].
4. Press [-MENU, –SETUP, RETURN]
repeatedly to select “EXIT” and
press [ENTER].
MENU
RETURN
SETUP
5. Press
.
6. While pressing
, press and
hold
for about 2 seconds.
TUNER
BAND
OK
2
Remote control operation guide/Specifications
Remote control operation guide
SC-HT65 GN-En.indb 22
8/17/2007 4:20:35 PM