Panasonic DVCPRO AJ-D250P - Manual (Page 66)

66
RS-232C
$ Search control commands
Sends data of computer Return data from VTR Description of command
[STX] SMI:data [ETX]
Parameters
data = wwghmmssff
O When the counter value is to
be stored in the memory
ww = LC: CTL data reference
SC: TC data reference
“ghmmssff” is omitted.
O When the parameter value for
which the CTL data serves as
the reference is to be stored in
the memory
ww = LP: CTL data reference
g = Blank: With a positive value
– sign: With a negative value
h = 0 9: Hours
mm = 00 59: Minutes
ss = 00 59: Seconds
ff = 00 29: Frames
O When the parameter value for
which the TC data serves as
the reference is to be stored in
the memory
ww = SP: TC data reference
gh = 00
23: Hours
mm = 00 59: Minutes
ss = 00 59: Seconds
ff = 00 29: Frames
[STX] SMI [ETX] Stores the counter value and parameter value in the
memory at the time when this command is received.
This command is ignored while a search control command
is being processed.
[STX] SMM:m [ETX]
Parameters
m = S: MEMORY STOP
O: REPEAT ONE TIME
A: CONTINUE
F: OFF
[STX] SMM [ETX] Sets the memory mode.
This command is ignored while a search control command
is being processed.