Panasonic DVCPRO AJ-D250P - Manual (Page 31)

31
TAPE PROTECT menu
The underlining denotes the factory mode setting.
When a consumer-use DV format tape is used, the tape protection mode will be established in 10 seconds
even if 30s, 1min or 2min is selected as the STILL TIMER item setting.
Setup Menus
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
400 STILL TIMER 0000
0001
0002
0003
0004
0005 0.5s
5s
10s
30s
1min
2min
For selecting the time taken for the tape protection mode to be established
when the unit has been left standing in the STOP, PLAY, PAUSE or STILL
mode.
(Units = s: seconds, min: minutes)
O When the unit has been left standing in the REC PAUSE mode, the time
taken for the tape protection mode to be established is fixed at 2 minutes.
401 SRC PROTECT
0000
0001
STEP
HALF
For setting the tape protection operation when the unit has been left
standing in the PAUSE mode.
0: Step (step FWD in STILL or PAUSE mode; step REV in REC PAUSE
mode)
1: Half loading (STANDBY OFF)
402 DRUM STDBY
0000
0001 OFF
ON
For setting the mode in which the drum is to be stopped during STANDBY
OFF.
0: The drum is stopped during STANDBY OFF.
1: The drum rotates at all times.
403 STOP PROTECT
0000
0001 STEP
HALF
For setting the tape protection operation when the unit is left standing in the
STOP mode.
0: Step
1: Half loading