Paradyne 6381 - Manual (Page 37)

Hotwire 6210, 6211, and 6381 User’s Guide
Figure 4-16. Multicast
The Apply button will temporarily save these settings. To make the change permanent, click on Tools (at the top of
the page) and select System Commands. At the System Commands page, click on Save All.
To enable IGMP Snooping , click Advanced and under Advanced, select IGMP Snooping. Figure 4-17 illustrates a
typical IGMP Snooping configuration.
Figure 4-17. IGMP Snooping
6210-A2-GB21-00 April 2004 37